1. Collecting speed from GPS satellites, available for all cars, easy to install, plug and play
2. Screen 5.5 inch HD display
3. Multi-color design makes the screen more abundant and easier to read
4. Nano-technology to eliminate double reflections,more clear.
5. Rich Contents: speed,compass, speed alarm,free switch between km and miles
6. Auto power on/off: HUD start and off with vehicle started and shutdown, effective protection of the car battery;retaining the manual switch mode,more easy to control HUD.
7. Automatic and manual brightness adjustment mode,driving without glare

Reflective film installation:
Using the unit without the reflective film may result in a double image observed by the user depending on the windshield. If you see a double layer it is due to the windshields dual layer construction and you should install the film by following the instructions below:
1. Place the supplied non-slip mat in the desired position on the dashboard with the HUD on top.
2. Observing where the HUD reflects place the reflective film in position.
    a. Ensure the surface is clean and dry before installing the film;
    b. Remove the back protective side marked (1) and attach the film to the clean windscreen;
    c. Once you’re satisfied with the location use a credit card or similar to remove any bubbles or air pockets that remain;
    d. Remove the front side marked (2), pls adjust the place of nonslip mat to make information can be fully display

Package Contain:
1 x A2 Head Up Display
1 x Car Charge Cable
1 x Reflective Film  
1 x Antiskid Pad
1 x User Manual